contacts:
mobile phone:86 18621751266
Mailbox:
Address:
Model number Technical parameters | WFY7-25 | WFY7-30 | WFY7-45 | WFY7-75 | |
Maximum modulus of bending section Cm3 | 1 | 5 | 12 | 21 | |
Curinding speed r/min | 5.6 | 5.6 | 5.0 | 2.8 | |
Section yield limit MPa | 345 | 345 | 345 | 345 | |
Cycylinder thrust T | hand movement | 8 | 18 | 25 | |
round bar steel | Maximum cross-section model | 18 | 25 | 38 | 48 |
minimum bending radius mm | 30 | 50 | 80 | 100 | |
Flat steel flat bending | Maximum cross-section model | 5*30 | 6*30 | 12*70 | 25*80 |
minimum bending radius mm | 90 | 90 | 150 | 150 | |
circular tube | Maximum cross-section model | 25*2 | 32*3 | 45*5 | 76*6 |
minimum bending radius mm | 65 | 80 | 115 | 190 | |
Minimum cross-section model | 8*1.5 | 6*1 | 20*1.5 | 20*1.5 | |
minimum bending radius mm | 30 | 30 | 60 | 80 | |
square pipe | Maximum cross-section model | 25*25*2.5 | 30*30*2.5 | 50*50*6 | 80*80*6 |
minimum bending radius mm | 150 | 150 | 250 | 300 | |
Minimum cross-section model | 10*2 | 10*2 | 20*2 | 20*2 | |
minimum bending radius mm | 40 | 40 | 60 | 80 |